LOADER MOUNTING 8-3
STEP 4. Move the tractor forward to put the inner bearing box into
the outer bearing box. Stop the tractor when the hook is
right over the pin.
Lower the inner bearing box with moving the boom and
bucket until it hooked securely each other.
STEP 5. Align the latch pin holes with moving the bucket and boom.
Insert the latch pins.
Rubber hammer can be used to put the pin in if needed.
STEP 6. Remove pin and keeper holding the parking legs and re-
turn to storage position. Make secure by using pin and
keeper.
120O802A
To Next Page
Loading...
