- 4 -
5. Loosen 8 lever guide mounting bolts (A) to remove the lever guide (B).
4. Pull out the pillar cover cap (A) and unscrew the mounting bolt to remove the pillar cover (B).
TG2A804A
TG2A805A TG2A806A
7. Pull out the double acting cable (10) through the back of the cabin and install the bellows (14) to fix it.
6. Insert the double acting lever (6) into the bracket, fit the washer 1 (8) and washer (7), and fix it with the snap pin (9).
Install the double acting cable (10) to the double acting lever, fit the plain washer (12) and washer 2 (11), and fix it with
the snap pin (13).
Install the double acting cable to the double acting lever bracket and secure it with the nut (A).
TG2A807A
TG2A808A
To Next Page
Loading...
