damaged.
■ The parallel cable is only used for 2 generators with the same model. It can’t be used for 3 or more
than 3 generators.
■ Only KIPOR parallel output cable and communication wire is allowed to use, never try other cables.
Use the receptacle output of parallel cable, don’t use the receptacle of control panel.
■ Don’t disconnect the PARALLEL I/O special communication wire and parallel output cable during
parallel operation. Connect the PARALLEL I/O communication wire and parallel output cable before
starting engine. Don’t disconnect the PARALLEL I/O communication wire and parallel output cable until
stop operation.
18
To Next Page
Loading...
Need help?
General
