Kipor ID6000 - AC Applications; Output and Overload Indicators

--
a. Open side door, unscrew the dipstick.
b. Drain the dirty oil to a container
c. Refill the recommended oil to the oil filler level and check it
d. screw the dipstick and close the side door
Oil capacity: KD186FGETi Engine: 1.65 L.
--
3. Check the air cleaner
Check the air cleaner element to be sure it is clean and in good condition.
Open the right door, loose the nut and remove the cap to check the filter element.
Clean or replace the element if necessary.
Never run the engine without the air cleaner. Rapid engine
wear will result from contaminants.¡£
4. Check fuel filter
Check the fuel filter to be sure it is clean and in good condition. Open the left door,
check the filter element. Clean or replace the element if necessary.
CAUTION
Oil level indicator
Tank cap
Cover plate of fuel filler
Upper level
Tank cap
Filter net
Thumb nut
Air filter cap
Seal ring of air filter shell
Air filter element
Air filter bottom shell
Air filter bottom seal
Oil drainage hole
Oil drainage bolt
Oil dipstick
Lower
limit
Dipstick
Oil filler
Upper limit