To Previous Page

-16-

OUTPUT CURRENT: indicating generator current

VOLTAGE: indicating generator voltage

LONG-RANGE CONTROL: indicating long-range control using if or not

RUNNING: indicating electric power exist if or not

OVERLOAD: indicating overload, the generator will self-braking

LOWER OIL PRESSURE: indicating lower oil pressure, the generator will self-

braking

START FAULT: indicating failure start

PROTECTION: indicating voltage & frequency higher (lower), the

generator will self-braking

EMERGENCY STOP: indicating stop generator according to emergency

Measure

-17-

Three-phase current: Indicating generator current.

Single phase power: Indicating generator power.

Generator voltage: Indicating generator voltage.

Generator running: Indicating the existence of electrical power.

Running trouble: Indicating running trouble, check it according to the code map list.

The indication lamp function of Code map list :

P-01 Low oil pressure: Indicating low oil pressure, the generator will self-braking.

P-02 Underfrequency: Indicating frequency higher (lower), the generator will self-

braking.

P-03 Undervoltage: Indicating voltage higher (lower), the generator will self-

braking.

P-04 Generator overload: indicate overload, the generator will self-braking.

P-05 Start trouble: Indicating failure start

P-06 Emergency indicator: Indicating stop generator according to emergency

measure.

P-07 Charging trouble: Charging system trouble.

P-08 Generator overheating: Water temperature of generator is overheated, the

engine will self-braking.

PVC Label (Three-phase)

Kipor KDE12EA3 User Manual

Questions and Answers: