Need help?Do you have a question about the Kipor KDE75SS3 and is the answer not in the manual?
General| Model | KDE75SS3 |
|---|---|
| Rated Voltage (V) | 230 |
| Rated Frequency (Hz) | 50 |
| Power Factor (Cos Phi) | 0.8 |
| Continuous Running Time (h) | 12 |
| Noise Level dB(A)@7m | 65 |
| Starting System | Electric start |
| Type | Inverter |
| Engine Type | 4-stroke |
| Displacement (cc) | 420 |
Instructions for electrical grounding of the generator and load appliances for safety.
Detailed procedures for grounding the generator and load appliances according to standards.
Methods for connecting three-phase and single-phase loads, including cable selection.
Overview of all necessary preparations before starting the generator.
Procedures for filling fuel, lubricant, and cooling water, including external tank notes.
Instructions for running the generator at low speed without load before initial load application.
Safety warnings and pre-start checks before operating the running generator.
Essential checks to perform before each start of the generator.
Procedure for adjusting frequency and voltage after starting without load.
Important considerations and checks before and during operation with load.
Correct procedure for safely shutting down the generator without causing damage.
Critical safety advice for rotating parts, electric shock, hot parts, and battery handling.
Diagnosing and resolving engine start failures and speed regulation problems.
To Next Page