Need help?Do you have a question about the Kipor KDE45SS3 and is the answer not in the manual?
General| Model | KDE45SS3 |
|---|---|
| Rated Frequency | 50 Hz |
| DC Voltage | 12 V |
| Waveform | Pure Sine Wave |
| Rated Voltage | 230 V |
| Protection | Overload protection, Low oil protection |
| Cooling | Air Cooled |
| Engine Type | 4-stroke |
Explanation of danger, warning, and caution labels and their application.
Safe operation practices, operator responsibilities, and handling abnormalities.
Dangers from toxic exhaust gas and rotating internal components.
Precautions against electric shock and fire risks from fuel and electrical systems.
Importance of proper grounding to prevent electric shock.
Safety measures for storing the generator and avoiding hot components.
Risks associated with hot radiator contents and battery handling.
Managing generator noise and ensuring safe cable connections.
Safety guidelines for maintenance procedures and generator transportation.
Precautions for installing the generator on flat ground, inclined surfaces, and near walls.
Safety guidelines for storing the generator, including ventilation and exhaust.
Safe methods for lifting, securing, and moving the generator.
Determining generator capacity based on motor type and load requirements.
Distributing phases equally for multiple AC electric welders.
Specific procedures for connecting and starting loads with the generator.
Safety measures and procedures for grounding the generator and load appliances.
Methods and standards for grounding the generator's outer box.
Importance of grounding load appliances and cable requirements.
Precautions for placing grounding rods and connecting cables.
Method for connecting three-phase loads to the generator's output terminals.
Connection methods for single-phase power and limitations on output.
Steps for connecting loads to single-phase receptacles and preventing overload.
Guidelines for selecting appropriate three-phase cables based on current and distance.
Recommended fuel types based on ambient temperature and quality standards.
Proper procedures for storing, handling, and using fuel to prevent issues.
Guidelines for choosing the correct lubricant based on grade and ambient temperature.
Instructions for using clean water and LLC for cooling, including mixture ratios.
Dangers associated with battery operation, including flammable gas and explosion risks.
Safety measures for charging, connecting, and maintaining the battery.
Important considerations during battery charging, including ventilation and preventing sparks.
To Next Page