-29-
-4-
2. Preparation for the engine
2-1 Initial start check
Check the each part of the generator before starting.
Making sure that anybody near the generator is warned, before starting the
generator.
Be care of these parts in the generator, such as rotary parts, hot parts, high-
voltage parts. Start the engine after closing the door for safety and noise control.
2-2 Initial start check
CAUTION
Stop the engine at once and check for the fault, if the warning lamps
light.
CAUTION
Check the unit for oil leakage, water leakage, air leakage and abnormal sound.
DANGER
The rotary parts are dangerous!
The high-speed rotating parts are very dangerous when the generator is
running.
Close the side doors when running the unit.
Service the unit after its engine stops completely.
b.KDE12STA3
To Next Page
Loading...
Need help?
General
