EasyManua.ls Logo

Kipor KDE19STA3 - Engine Start and Stop; Initial Break-in Period; Starting the Generator

Kipor KDE19STA3
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
3.1 Engine Oil
29
7.2 Storage
1. Clean each generating set component.
2.Check each part according to the maintenance schedule and repair/service the faulty
parts.
3. Replace the engine oil with fresh oil before operating the generating set after storage.
4.Fill the fuel tank with fresh diesel fuel.
5.Disconnect the battery ground cable from the terminal and tape it. While storing the
battery, fully charge teh battery once a month.
6.Cover the generating set and place it in a well ventilated and dry area. If the
generating set is still hot, wait until it cools down cover.
consult our authorized agent.

Related product manuals