Note:
The required output of the electrical appliance cannot exceed the rated output of parallel
generators.
Shutting off the generators:
1. Turn off the power of electrical appliance then, pull out the receptacle plug.
2. Turn off the two generators.
3. Disconnect the parallel kits from the generators.
• The parallel cable connectors can only be used with Kipor parallel ready generators.
• While connecting the generator and electrical appliance with the parallel output cable, do
so carefully and safely insert the plug into the receptacle.
• While operating in parallel, the only AC output is through the receptacle on the parallel
cable box. Don't use the receptacles on the control panel of either generator.
• Don't disconnect the parallel cables during operation.
To Next Page
Loading...
