Smart Throttle Switch
DC Receptacle
DC Circuit
Protector
AC Receptacle
Output Indicator Light
Overload Indicator
Light
Ground Terminal
Low Oil Alarm
Indicator Light
AC Receptacle AC Receptacle AC Receptacle
H Type (230V) A Type (240V) A Type (120V)
Control panel
1.Remove the four M5 screws, and remove the muffler protector.
2.Remove the muffler, the spark arrester and the muffler gasket
3.Use a brush to remove carbon deposits from the spark arrester screen.
4.Check the muffler gasket; replace if damaged. Reinstall the muffler gasket, the
spark arrester, the muffler and the muffler protector in the reverse order of removal.
Fuse
Fuse
Fuse
Fuse
Spark arrester
Muffler
Muffler gasket
Rear cover
Seal strip of rear cover
To Next Page
Loading...
