43
OPTIONAL ACCESSORIES
Clean Vinyl or Tile Floors
1
Fill the Shampoo Tank with warm water to the first line. Add
one tank cap full of Kirby
®
Hard Floor Cleaner Concentrate.
Using the large cap from the top of the tank, pour one
capful of Kirby
®
Hard Floor Cleaner into the Shampoo
Tank. Do not use more, as over-foaming will result.
Replace the large cap on the Shampoo Tank.
Use only Kirby
®
cleaning solutions, such as Kirby
®
Hard
Floor Cleaner Concentrate, intended for use with this
product. Failure to follow this warning could result in
injury due to internal component damage.
2
Firmly connect the elbow hose to the Multi-Surface
Shampoo Nozzle.
3
Taking care to avoid spilling liquid on the unit or the floor,
place the opening in the bottom of the Shampoo Tank over
the Air Exhaust Port.
Rotate the Shampoo Tank toward the unit to lock it in place.
4
Connect the elbow hose to the bottom of the Shampoo Tank.
5
Press the Toe-Touch Control Upper Pedal repeatedly until the
Rotary Mop contacts the floor.
To Next Page
Loading...
