4544
6
Turn the Suds Control Valve clockwise to the Hard Floor
Setting. Put Tech Drive
®
power assist in neutral. Turn the
unit on. As the unit is moved back and forth, cleaning
solution will release and the Rotary Mop will scrub the floor.
7
Turn the Suds Control Valve to the OFF position. Go back
over the floor to thoroughly clean the floor and to pick up
excess solution.
8
If necessary, use a towel to wipe up excess fluid.
Allow the floor to dry completely.
9
Clean the Multi-Surface Shampoo System thoroughly.
Allow all parts, especially the Rotary Mop, to dry
thoroughly before storage.
10
Over time, the Rotary Mop fibers will wear down.
Replace the Rotary Mop regularly for best
cleaning results.
OPTIONAL ACCESSORIES
To Next Page
Loading...
