Need help?Do you have a question about the KIRLOSKAR DB 40/26 and is the answer not in the manual?
General| Model | DB 40/26 |
|---|---|
| Head | 26 m |
| Speed | 2900 RPM |
| Voltage | 415V |
| Frequency | 50 Hz |
| Material | Cast Iron |
| Flow Rate | 400 LPM |
| Head Range | Up to 26 m |
| Phase | Three Phase |
Details safety symbols used in the manual, including hazard and caution indicators.
Covers personnel access, manual reading, PPE, and operational precautions.
List of pre-start checks including free rotation, sealing, greasing, and priming.
Steps for starting, running, and checking the pump during operation.
Procedures for safely stopping the pump, including valve closure and motor stop.
States that overhaul is due after 5000 working hours and should be done by skilled personnel.
Step-by-step procedures for dismantling and reassembling pump parts after cleaning and inspection.
Discusses common pump troubles and provides methods for diagnosing breakdown causes and check points.
Explains priming necessity and methods, and emphasizes correct starting after priming.
Procedure for stopping the pump and advice on stuffing box gland tightness.
Discusses common pump troubles and provides methods for diagnosing breakdown causes and check points.
Lists various potential causes for pump operational issues, categorized by specific problems.
To Next Page