EasyManua.ls Logo

KIRLOSKAR KMW Univator - WARNING SIGNALS

KIRLOSKAR KMW Univator
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY NOTES
2.0
2.3 WARNING SIGNALS
2.3.1 There are three types of signals:
DANGER:
This signal warns when serious injuries, death or long-term health risks would be caused
by failure to correctly carry out the described operations.
WARNING:
This signal warns when serious injuries, death or long-term health risks could be caused
by failure to correctly carry out the described operations.
CAUTION:
This signal warns when damage to the machine could be caused by failure to carry out the
described operations.
2.3.2 In order to identify the various levels of danger, the following describe situations and
specific definitions that may directly involve the machine or persons.
DANGER ZONE:
Any area inside and / or near a machine in which the presence of an exposed person
constitutes a risk for the safety and health of that person.
EXPOSED PERSON:
Any individual who happens to be completely or partly in a risk zone.
OPERATOR:
The person/s charged with installing, starting up, adjusting, carrying out maintenance,
cleaning, repairing or transporting a machine.
USER:
The user is the person or the organization or the firm which has purchased or rented the
machine and intends to use it for the purposes it was conceived for.
SPECIALIZED PERSONNEL:
Those persons who have been specially trained and qualified to carry out interventions of
maintenance or repair requiring a particular knowledge of the machine, its functioning,
safety measures, methods of intervention - and who are in a position to recognize the
potential dangers when using the machine and are able to avoid them.
AUTHORIZED SERVICE CENTER:
The authorized Service Center is a structure legally authorized by the manufacturer which
disposes of personnel specialized and qualified to carry out all the operations of
assistance, maintenance and repair - even of a certain complexity - found necessary to
keep the machine in perfect working order
Become thoroughly familiar with all the instructions before using the machine. Contact
the dealer in case of doubt. The Manufacturer declines all and every responsibility for
failure to comply with the safety and accident prevention. Regulations described herein.
1) Comply with the instructions given by the danger symbols in this handbook and
affixed to the machine itself.
2) Never ever touch any moving part.
3) Operations and adjustments to the implement must always be carried out when the
engine is off and the tractor braked.
4) Before proceeding with any work under the machine, make sure that the driveline has
been detached from the PTO and secure the machine itself with supports to make
sure that it is unable to accidentally drop.
5) It is absolutely forbidden for persons without a driving license, in expert persons or
those in precarious health conditions to drive the tractor with the machine mounted.
12

Related product manuals