INSTALLING BATTERIES
Open the battery compartment cover, insert two AA batteries inside of the
compartment, replace the cover.
Note:
⚫ The Jar Opener may run automatically after inserting the batteries until
the outer arms of the jar opener move back to their start position.
PREPARING THE JAR BEFORE USE
Place your Jar on a flat tabletop, remove any film or paper sleeves from
around the Jar and ensure the lid of the jar is dry.
USING THE JAR OPENER
1. Place the Jar Opener on top of the Lid.
Tips:
Press and hold the power button for the arms to
open fully. Ensure the rubber bars on the base of
the outer arms are angled to the angle of the jar.
2. Press and hold the power button until
the inner arms grasp the Lid, and outer
arms grasp the Jar.
3. Release the power button.
The unit will open the Jar, the arms will
automatically move backwards to their
maximum position after opening the Jar.
Note:
1. The unit may operate automatically when moving the Arms manually.
This is normal.
2. The grip rubbers on outer arms are adjustable to fit the Jar.
3. Hold the unit top during operation to avoid
it ‘popping up’ after opening the Jar.
To Next Page
Loading...
