JUICE EXTRACTOR
TO ATTACH:
Insert round end of metal Shaft (1) into Reamer (2) so that pins fit in slot. Insert square end of
Shaft (3) through Shaft Housing portion of Shield (4). Place Strainer (5), narrow end first, into
slots in Shield.
Loosen Attachment Knob. Insert Shaft Housing (4) into Attachment Hub (6) making certain
that the square end of the Shaft fits into the square Hub Socket. Please read general instruc-
tions, page 33.
TO USE:
Place glass or pitcher under Juice Extractor
to catch juice. Turn to Speed 6. Holding
fruit firmly cupped in hand, bring fruit in
contact with spinning Reamer. Move fruit in
all directions, exerting an inward and down-
ward pressure to extract the juice.
41
To Next Page
Loading...
