POURING SHIELD
Chute is lined up by turning Shield
until Beater attachment can be
lowered through.
K5A: Attach Beater with Bowl in low
position. Then raise Bowl to Motor
Head.
TO USE:
Place or pour ingredients into chute portion
of
Pouring Shield to introduce them into the Bowl
while Food Preparer is mixing.
TO SCRAPE BOWL . .
. Lift Pouring Shield over
Motor Head. Lift Motor Head (K45) or lowir
Bowl (K5A) and scrape as needed.
TO ATTACH:
Place Pouring Shield on rim
of
Bowl. Attach
Bowl to Food Preparer. Then attach Flat Beater,
Wire Whip or Dough Hook.
K45: Attach Beater, Whip or Dough Hook
with Motor Head tilted up. Lower
Beater attachment through chute
portion
of
Shield.
To Next Page
Loading...
Need help?
General
