USING THE BURR GRINDER | 7
USING THE BURR GRINDER
ASSEMBLING AND RUNNING THE BURR GRINDER
NOTE: Before using the Burr Grinder, wipe the motor housing and cord with a clean
damp cloth. Wash the bean hopper and lid, and ground jar in hot soapy water, then
rinse and dry; or, wash in the top rack of a dishwasher.
1
Make certain the Burr Grinder is
unplugged. Attach the bean hopper
to the top of the motor housing,
turning clockwise until snug.
2
Slide the ground jar onto the
jar platform, making certain it
is centered in the middle.
3
Fill the bean hopper and then attach
the lid.
4
Select your desired grind setting,
using the “Grind setting chart”.
W10790652A_Final.indd 7 8/4/15 8:36 AM
To Next Page
Loading...
