7
BEFORE FIRST USE
1
Lift up the Lid Latch to unlock the
cover. Tilt the Work Bowl cover back
and lift it straight up so that the Lid
Hinge pulls out of the Handle Hinge.
2
Remove all parts and accessories
from the Work Bowl, and lift the Food
Pusher out of the feed tube.
1
Place the Work Bowl on the base,
aligning the handle with the raised
button on the right side of the base.
The bowl will click into place and
should be flush against the base
when properly aligned.
2
Place the Drive Adapter in the work
bowl, lowering it onto the Drive Pin.
PRODUCT USAGE
Before using your Food Processor for the first time, wash all parts and accessories either
by hand or in the dishwasher (see the “Cleaning the Food Processor” section). Your Food
Processor is designed so that all accessories may be stored inside the work bowl.
ASSEMBLING THE FOOD PROCESSOR
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls
facing forward. Do not plug in the Food Processor until it is completely assembled.
W11501509A_01_EN.indd 7W11501509A_01_EN.indd 7 30-12-2020 13:29:0330-12-2020 13:29:03
To Next Page
Loading...
Need help?
General
