8
PRODUCT USAGE
NOTE: For ease of assembly, install the desired blade or disc before attaching
the work bowl cover.
NOTE: Your Food Processor will not
operate unless the work bowl cover is
fully closed and the work bowl is properly
seated on the base.
3
To attach the Work Bowl cover, push
the Lid Hinge into the Handle Hinge
on the Work Bowl and close the
cover.
4
Once the Work Bowl cover is closed,
push the Lid Hinge down into the
locked position.
INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE
1
Place the Blade on the Drive Adapter.
Rotate the blade so it falls down to
the Base of the Adapter.
2
Install the Work Bowl cover, making
sure the Lid Latch is pushed down to
the locked position.
W11501509A_01_EN.indd 8W11501509A_01_EN.indd 8 30-12-2020 13:29:0430-12-2020 13:29:04
To Next Page
Loading...
Need help?
General
