To Attach Glass Bowl to Mixer
GUIDE TO ATTACHING GLASS BOWL
BEFORE USING
− Your Stand Mixer is individually adjusted at the factory for optimal performance. When
using the Glass Bowl, it may be necessary to readjust the Beater to Bowl clearance. Ensure
the Thread Ring on the bottom of the Glass Bowl is tight enough to avoid Beater to
Bowl hits. When correctly positioned, the handle and pour spout should not touch the
pedestal of the mixer. Please refer to the “Use and Care” Guide for complete instructions on
adjusting the Beater to Bowl clearance.
− Remove the Thread Ring before using
the Glass Bowl in a microwave oven.
TIPS FOR USE
− Bowl and Thread Ring are dishwasher-safe
top rack only.
Quick Guide for using
the Glass Bowl (5KGB)
For use with the Tilt-Head Stand Mixers only.
Not for use with model KN1PS (Accolade Series)
0 Stir 2 4 8 10
1. Turn OFF Stand Mixer.
2. Unplug Stand Mixer.
3. Align Glass Bowl and twist in place.
− To avoid product damage, do not use
the Glass Bowl in areas of high heat,
such as an oven or on a stove top.
CARE AND CLEANING
To Next Page
Need help?
General
