10
ASSEMBLING THE MAXIMUM EXTRACTION JUICER
Assembling the Maximum Extraction Juicer parts
1
Slide the gasket into place behind
the pulp chute�
Before First Use
Before using your Maximum Extraction Juicer for the first time, the Main Juicer body should be
wiped clean with a damp cloth� All other parts should be washed by hand or in the top rack of
the dishwasher� See “Care and Cleaning” section�
2
Place the bowl into the juicer body�
3
Put the screen wiper basket into the
bowl�
4
Place the screen of your choice into
the screen wiper basket so that the
alignment mark matches up with the
mark on the bowl�
Alignment
marks
To Next Page
Loading...
