12
OPERATING THE MAXIMUM EXTRACTION JUICER
Making juice
BEFORE JUICING: Large seeds or pits
need to be removed prior to juicing to
avoid damage to the auger or screens� This
includes fruits such as; nectarines, peaches,
mangoes, apricots, plums, cherries, etc.
3
To make sauces, make sure the rubber
gasket is in place, and sauce screen is
installed� Pull the pulp chute out; this
is the closed position� When the pulp
chute is closed, the juice and fiber exit
through the juice chute as a sauce�
2
To make juice, the pulp chute should
always be pushed in; this is the open
positon. When the pulp chute is open,
pulp created while juicing will flow
through the pulp chute, separating it
from the juice�
Pulp
Juice
1
Plug into a grounded outlet�
To Next Page
Loading...
