INSTALLATION REQUIREMENTS
Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft
areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for grill:
◼ A minimum of 91.44 cm (36") must be maintained between
the front of the grill hood, sides and back of the grill and
any combustible construction.
◼ A 91.44 cm (36") minimum clearance must also be
maintained below the cooking surface, and the grill shall
not be used under overhead combustible construction.
Product Dimensions
A
A. Model/serial number plate
Location Requirements
32
The model/serial number rating plate is located on the inside of
the left cabinet door. See the following illustration.
To Next Page
Loading...
