To Next PageTo Next Page
Need help?Do you have a question about the KitchenAid 720-0745B and is the answer not in the manual?
General| Brand | KitchenAid |
|---|---|
| Model | 720-0745B |
| Category | Grill |
| Language | English |
Describes DANGER and WARNING symbols and their meanings for hazard communication.
Lists chemicals known to cause cancer or reproductive harm as per California law.
Specifies requirements for qualified contractors and gas fitters in Massachusetts.
Details safe handling, storage, and connection requirements for LP gas cylinders.
Covers safe practices for operating the grill, including ventilation and hose inspection.
Lists necessary tools and supplied/required parts for the grill installation process.
Specifies safe placement and clearance guidelines to avoid fire and explosion hazards.
Outlines specific clearance needs if a rotisserie accessory is installed.
Explains necessary adjustments for grills used at elevations above 2,000 feet.
Details procedures for testing gas supply lines at different pressure levels.
Provides instructions for connecting a 20 lb LP gas fuel tank, including regulator and mounting.
Outlines the process and requirements for converting the grill from LP gas to Natural gas.
Lists part numbers, descriptions, warranty coverage, and quantities for grill components.
Provides step-by-step guidance for the initial assembly and setup of the grill.
Details the process of attaching the right side shelf and integrating the side burner.
Describes connecting the side burner components, including the orifice bracket and electrical plugs.
Guides the attachment of both the right and left side shelves to the main grill body.
Instructs on how to correctly install the grill grates and warming shelf.
Provides initial steps and notes for connecting the gas supply to the grill.
Details the procedure for securely connecting the 20 lb LP gas fuel tank to the grill.
Outlines the safe steps required to disconnect the LP gas fuel tank from the grill.
Lists the specific tools and parts needed for performing a gas conversion on the grill.
Explains the initial steps and safety precautions for converting the grill from LP to Natural gas.
Guides the connection of the natural gas supply line to the grill, including fittings and shut-off valves.
Details how to replace the main burner valve orifices during a gas conversion.
Covers changing the side burner orifice, recording the conversion, and adjusting the high flame setting.
Describes ideal flame appearance and potential issues like yellow tips or noisy flames.
Provides instructions for adjusting the burner's low flame setting to ensure stability.
Identifies and describes the functions of the various control knobs on the grill's panel.
Offers general guidance and safety warnings for operating the grill.
Details how to inspect the gas hose and regulator assembly for safety before each use.
Covers preparing the grill for lighting, including turning on gas and drip pan placement.
Provides step-by-step instructions for safely lighting the main burners, including manual methods.
Explains how to light the side burner using the igniter or manual lighting.
Details the procedure for manually igniting the side burner if the primary igniter fails.
Offers advice on thawing food, preheating the grill, and managing fat to prevent flare-ups.
Provides guidance on turning food, testing doneness, and applying sauces during the grilling process.
Explains the principles of direct and indirect heat cooking methods for optimal results.
Offers recommended cooking times, temperatures, and methods for various types of food.
Describes how to replace the battery for the grill's igniter system.
Outlines basic cleaning steps using soap, water, and soft cloths for routine maintenance.
Provides detailed cleaning instructions for stainless steel parts, grates, warming shelf, exterior, and interior.
Details how to clean the main burners and side burner ports to ensure proper operation.
Addresses common problems like the grill not lighting or burners not staying lit.
Helps diagnose and fix issues with flame appearance, noise, and stability.
Provides contact information and instructions for obtaining replacement parts.
