KitchenAid 810-0021 - Installation Requirements; Location Requirements

30"(760mm)
59.9"(1522.5mm）
15"(380mm)
51.3"(1305mm)
28.9"(735mm)
INSTALLATION REQUIREMENTS
A. Model/serial number plate
Location Requirements
Product Dimensions
Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft areas.
Clearance to combustible construction for grill:
▪ A minimum of 36" (91.4 cm) must be maintained between the
front of the grill hood, sides and back of the grill and any
combustible construction.
▪ A 36" (91.4 cm) minimum clearance must also be maintained
below the cooking surface, and the grill shall not be used under
overhead combustible construction.
The model/serial number rating plate is located on the right side
of cart. See the following illustration.
24