EasyManua.ls Logo

KitchenAid Ensemble KEHS01PMT/WH - User Manual

KitchenAid Ensemble KEHS01PMT/WH
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TECHNICAL EDUCATION
JOB AID 4317356
KAL-5
FRONT-LOADING
GAS AND ELECTRIC
DRYERS
MODELS: KGHS01PMT / WH & KEHS01PMT / WH
Question and Answer IconNeed help?

Do you have a question about the KitchenAid Ensemble KEHS01PMT/WH and is the answer not in the manual?

Summary

GENERAL SAFETY FIRST

Safety First

Emphasizes safety and explains hazard symbols and warnings.

LOCATION REQUIREMENTS

Explosion Hazard and Installation Clearances

Warnings on hazards and required spacing for dryer installation.

ELECTRICAL REQUIREMENTS FOR ELECTRIC DRYERS-U.S.A.

Technician Responsibilities and Connection Methods

Lists responsibilities and explains 3-wire vs 4-wire connections.

Electric Dryer Power Supply Cord Connection

Electric Dryer Direct Wire Connection

GROUNDING INSTRUCTIONS

ELECTRICAL REQUIREMENTS FOR ELECTRIC DRYERS-CANADA

Canadian Grounding Instructions

U.S.A. Electric Dryer Connection: Power Supply Cord

U.S.A. Electric Dryer Connection: Direct Wire

Electrical Connection Options Guide

4-Wire Power Supply Cord Connection Procedures

4-Wire Direct Wire Connection Procedures

3-Wire Power Supply Cord Connection Procedures

3-Wire Direct Wire Connection Procedures

Optional 3-Wire Connection Procedures

ELECTRICAL REQUIREMENTS FOR GAS DRYERS

Electrical Safety and Grounding for Gas Dryers

Safety warnings and grounding for gas dryers.

GAS SUPPLY REQUIREMENTS

Safety and installation requirements for gas supply.

Gas Supply Line Requirements

VENTING REQUIREMENTS

Fire Hazard and Vent Material Requirements

Warnings on fire hazards and approved vent materials.

Determine Vent Length and Route

INSTALL VENT SYSTEM Procedures

INSTALL LEVELING LEGS

Dryer Moving Hazards and Leveling Procedures

Warnings on moving hazards and steps to level the dryer.

MAKE GAS CONNECTION Procedures

CONNECT VENT Procedures

COMPLETE THE INSTALLATION Final Checks

Dryer Start and Heating Troubleshooting

INSTALLING THE DRYER ON THE PEDESTAL

Installation Hazards and Dryer Uninstalling

Warnings on installation hazards and steps to uninstall the dryer.

Pedestal Installation Procedure

Detailed steps for attaching the dryer to the pedestal.

INSTALLING THE PEDESTAL

Pedestal Installation and Leveling

Steps for installing the pedestal and leveling the unit.

Completing Pedestal Installation and Leveling

PRODUCT OPERATION

Operational Safety Warnings

Warnings on hazards during dryer operation (explosion, fire).

COMPONENT ACCESS

REMOVING THE ELECTRONIC CONTROL BOARD

Removing Electronic Control Board (Continued)

REMOVING THE CONSOLE & TOUCHPAD SUBASSEMBLY

Removing Console & Touchpad Subassembly (Continued)

REMOVING THE DOOR SWITCH

REMOVING THERMAL FUSE, THERMISTOR, DRIVE MOTOR, & BELT SWITCH

Removing Thermal Fuse, Thermistor, Drive Motor, & Belt Switch (Continued)

Drive Motor and Blower Housing Removal

Steps to remove the drive motor and blower housing.

Removing Thermal Fuse, Thermistor, Drive Motor, & Belt Switch (Continued)

REMOVING HEATER, HIGH-LIMIT THERMOSTAT, & THERMAL CUTOFF (ELECTRIC DRYERS ONLY)

Removing Heater, High-Limit Thermostat, & Thermal Cutoff (Continued)

High-Limit Thermostat and Thermal Cutoff Removal

Steps to remove the high-limit thermostat and thermal cutoff.

REMOVING THE BELT, DRUM, & ROLLERS

Removing Belt, Drum, & Rollers (Continued)

Belt and Drum Removal

Steps to remove the belt and drum.

Removing Belt, Drum, & Rollers (Continued)

REMOVING THE DRUM LIGHT SOCKET

Removing Drum Light Socket (Continued)

REMOVING THE MOISTURE SENSOR

REMOVING BURNER ASSEMBLY, FLAME SENSOR, AND HIGH-LIMIT THERMOSTAT (GAS DRYERS ONLY)

Removing Burner Assembly, Flame Sensor, and High-Limit Thermostat (Continued)

Wire Disconnection and Ignitor Removal

Steps to disconnect wires and remove ignitor.

Coil and Flame Sensor Removal

Steps to remove coils and flame sensor.

Removing the High-Limit Thermostat

COMPONENT TESTING

Electrical Shock Hazard Warning

Critical safety warning before performing component tests.

DRIVE MOTOR Component Testing

THERMAL FUSE Component Testing

THERMISTOR Component Testing

THERMAL CUTOFF Component Testing (ELECTRIC DRYERS ONLY)

DOOR SWITCH Component Testing

GAS BURNER COILS Component Testing

BURNER IGNITOR Component Testing

FLAME SENSOR Component Testing

HIGH-LIMIT THERMOSTAT Component Testing

DIAGNOSTICS AND TROUBLESHOOTING

Electrostatic Discharge (ESD) Precautions

Precautions for handling electronic components to prevent ESD damage.

DISPLAY FAULT;ERROR CODES

DIAGNOSTIC TESTS Introduction

TROUBLESHOOTING GUIDE

TEST #1: SUPPLY CONNECTIONS

TEST #1: SUPPLY CONNECTIONS (Continued)

TEST #2: MOTOR CIRCUIT TEST

TEST #3: HEATER TEST

TEST #3 a: THERMISTOR TEST

TEST #3 b: THERMAL FUSE TEST

TEST #3 c: GAS VALVE TEST (GAS DRYERS ONLY)

TEST #3 c: THERMAL CUTOFF TEST (ELECTRIC DRYERS ONLY)

TEST #4: MOISTURE SENSOR TEST

TEST #5: BUTTON & LED TEST

Checking The Button Functions

Checking The Rotary Cycle Selector

TEST #6: DOOR SWITCH TEST

WIRING DIAGRAMS

KitchenAid Ensemble KEHS01PMT/WH Specifications

General IconGeneral
BrandKitchenAid
ModelEnsemble KEHS01PMT/WH
CategoryDryer
LanguageEnglish

Related product manuals