EasyManua.ls Logo

KitchenAid Ensemble KGHS01PMT/WH - User Manual

KitchenAid Ensemble KGHS01PMT/WH
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TECHNICAL EDUCATION
JOB AID 4317356
KAL-5
FRONT-LOADING
GAS AND ELECTRIC
DRYERS
MODELS: KGHS01PMT / WH & KEHS01PMT / WH
Question and Answer IconNeed help?

Do you have a question about the KitchenAid Ensemble KGHS01PMT/WH and is the answer not in the manual?

Summary

GENERAL SAFETY INFORMATION

SAFETY FIRST GUIDELINES

Crucial safety instructions and hazard warnings for appliance operation and user protection.

MODEL AND SERIAL NUMBER IDENTIFICATION

DRYER MODEL NUMBER DESIGNATIONS

Explains the structure and meaning of KitchenAid dryer model numbers.

DRYER SERIAL NUMBER FORMAT

Details the components and format of the dryer's serial number for identification.

PRODUCT SPECIFICATIONS

KITCHENAID DRYER SPECIFICATIONS

Technical details, features, and dimensions for KitchenAid gas and electric dryers.

WARRANTY INFORMATION

KITCHENAID DRYER WARRANTY DETAILS

Outlines the comprehensive warranty for the first two years of ownership.

PEDESTAL WARRANTY INFORMATION

Specifies the warranty duration and coverage for pedestal mechanical parts.

INSTALLATION INFORMATION

INSTALLATION INSTRUCTIONS AND OPTIONS

Step-by-step guidance for installing the dryer, including tools and options.

LOCATION REQUIREMENTS FOR DRYER INSTALLATION

GENERAL LOCATION AND CLEARANCE NEEDS

Specifies environmental and space requirements for safe and effective dryer installation.

SPECIFIC INSTALLATION LOCATIONS

Details requirements for undercounter, closet, and mobile home installations.

ELECTRICAL REQUIREMENTS FOR ELECTRIC DRYERS

ELECTRICAL CONNECTION PROCEDURES

Explains how to connect electric dryers to power, including 3-wire and 4-wire options.

GROUNDING INSTRUCTIONS AND SAFETY

Essential guidelines for proper dryer grounding to prevent electrical shock.

CANADIAN ELECTRICAL REQUIREMENTS

Specific electrical requirements and codes applicable to electric dryers in Canada.

4-WIRE CONNECTION METHODS

Details on the 4-wire connection methods and their requirements.

3-WIRE CONNECTION METHODS

Covers the 3-wire connection methods and their requirements.

OPTIONAL 3-WIRE CONNECTION DETAILS

Specific instructions for the optional 3-wire connection method.

ELECTRICAL REQUIREMENTS FOR GAS DRYERS

GAS SUPPLY REQUIREMENTS AND SAFETY

Outlines necessary requirements for connecting the gas supply safely.

GAS SUPPLY LINE AND CONNECTION GUIDELINES

Specific guidelines for installing the gas supply line and connections.

VENTING REQUIREMENTS AND SAFETY

GENERAL VENTING RULES AND FIRE HAZARDS

Essential rules and warnings for proper dryer venting to prevent fire hazards.

VENT SYSTEM INSTALLATION PLANNING

Instructions and diagrams for routing the dryer's exhaust vent system.

DETERMINING MAXIMUM VENT LENGTH

Guidance on calculating maximum vent length based on turns and materials.

INSTALLATION PROCEDURES

VENT SYSTEM INSTALLATION STEPS

Step-by-step instructions for connecting the dryer's vent system.

INSTALL LEVELING LEGS

Procedures for attaching and adjusting the dryer's leveling legs.

REVERSING THE DOOR SWING

DOOR REMOVAL AND REASSEMBLY

Step-by-step guide to safely remove, reverse, and reinstall the dryer door.

PEDESTAL INSTALLATION PROCEDURES

INSTALLING THE DRYER ON THE PEDESTAL

Steps for securely mounting the dryer onto its pedestal base.

INSTALLING THE PEDESTAL

Detailed instructions for attaching the pedestal to the dryer.

PRODUCT OPERATION AND CONTROLS

STARTING AND OPERATING THE DRYER

Guide on how to initiate a drying cycle and select settings.

STOPPING, PAUSING, AND RESTARTING THE DRYER

Instructions on how to safely stop, pause, and restart the dryer.

CONTROL PANEL FEATURES AND INDICATORS

Explains the meaning of the indicator lights and display on the control panel.

CYCLE DESCRIPTIONS AND USAGE

Overview and explanation of all automatic and manual dryer cycles.

ADDITIONAL DRYER FEATURES

Explains extra features like Extra Care, Temperature, Air Only, and Cycle End Signal.

COMPONENT ACCESS AND REMOVAL

COMPONENT LOCATIONS DIAGRAM

Diagram showing the location of key internal dryer components for service.

ELECTRONIC CONTROL BOARD REMOVAL

Step-by-step guide for safely removing the electronic control board.

CONSOLE AND TOUCHPAD SUBASSEMBLY REMOVAL

Procedure for removing the dryer's console and touchpad assembly.

DOOR SWITCH REMOVAL

Instructions for removing the dryer door switch.

THERMAL FUSE, THERMISTOR, DRIVE MOTOR, BELT SWITCH REMOVAL

Steps for removing thermal fuse, thermistor, drive motor, and belt switch.

HEATER, HIGH-LIMIT THERMOSTAT, THERMAL CUTOFF REMOVAL

Steps to remove the heater, high-limit thermostat, and thermal cutoff.

BELT, DRUM, AND ROLLERS REMOVAL

Step-by-step instructions for removing the drum belt, drum, and rollers.

DRUM LIGHT SOCKET REMOVAL

Guide for safely removing the drum light socket assembly.

MOISTURE SENSOR REMOVAL

Steps to remove the dryer's moisture sensor.

BURNER ASSEMBLY, FLAME SENSOR, HIGH-LIMIT THERMOSTAT REMOVAL (GAS DRYERS)

Procedure for removing gas burner assembly, flame sensor, and high-limit thermostat.

COMPONENT TESTING PROCEDURES

HEATER TESTING AND RESISTANCE

Procedure to test the resistance of the heater element.

DRIVE MOTOR TESTING AND RESISTANCE

Steps to test the drive motor's main and start windings.

THERMAL FUSE TESTING

Test to check continuity of the thermal fuse.

THERMISTOR TESTING AND TEMPERATURES

Procedure to test thermistor resistance and exhaust temperatures.

THERMAL CUTOFF TESTING

Test for continuity of the thermal cutoff device.

DOOR SWITCH TESTING AND RESISTANCE

Resistance tests for the door switch in different states.

GAS BURNER COILS AND IGNITOR TESTING

Resistance tests for the gas burner coils and ignitor.

FLAME SENSOR AND HIGH-LIMIT THERMOSTAT TESTING

Tests to verify continuity of the flame sensor and high-limit thermostat.

DIAGNOSTICS AND TROUBLESHOOTING

DIAGNOSTIC GUIDE AND INITIAL CHECKS

General checks and initial troubleshooting steps before detailed testing.

DISPLAY FAULT AND ERROR CODES

Explains error codes displayed on the console and their causes.

DIAGNOSTIC TESTS AND ACTIVATION

Procedures for testing dryer inputs and components via diagnostic mode.

TROUBLESHOOTING GUIDE BY PROBLEM

A table mapping common problems to potential causes and tests.

SUPPLY CONNECTIONS TEST

Tests electrical supply connections to ensure proper voltage.

MOTOR CIRCUIT TEST

Checks the wiring and resistance of the motor circuit.

HEATER TEST

Tests components related to the dryer's heating system.

THERMISTOR TEST

Specific test for the thermistor's function and resistance.

THERMAL FUSE TEST

Procedure to test the continuity of the thermal fuse.

GAS VALVE TEST (GAS DRYERS ONLY)

Tests the gas valve coil resistance for gas dryers.

MOISTURE SENSOR TEST

Tests the moisture sensor for proper operation.

BUTTON & LED TEST

Verifies functionality of control panel buttons and LEDs.

CHECKING CONTROL PANEL FUNCTIONS

Detailed resistance checks for control panel buttons and cycle selector.

DOOR SWITCH DIAGNOSTIC TEST

Tests the door switch function and continuity.

WIRING DIAGRAMS

ELECTRIC DRYER WIRING DIAGRAM

Electrical schematic for the electric dryer model.

GAS DRYER WIRING DIAGRAM

Electrical schematic for the gas dryer model.

SUPPORT INFORMATION

PRODUCT SPECIFICATIONS AND WARRANTY CONTACTS

Phone numbers and website for product specifications and warranty support.

KitchenAid Ensemble KGHS01PMT/WH Specifications

General IconGeneral
BrandKitchenAid
ModelKGHS01PMT/WH
CategoryDryer
ColorWhite
Energy Star CertifiedNo

Related product manuals