KitchenAid KCM111 User Manual

Error Codes - Automatic Coffee Maker
Possible Solutions
Some coffee makers have an LED display which may show an error code. The error codes can mean different things
depending upon which model you have.
Models that start with KCM5
Error
Code
Information Resolution
Err1
If the coffee maker is near an outside wall in a cold climate, or
if the water is quite cold, this error may display.
Move the coffee maker to a warmer
location or us slightly warmer water.
Err2
An electrical component has been dislocated within the coffee
maker.
There is no repair for this issue.
Err4 Stuck button
Press and release all buttons on the
coffee maker.
Model: KCM111
Err1 - A button may be jammed. Unplug the coffee maker and press each button several times. Plug the coffee maker
into a grounded 3-prong outlet. If “Er1” appears again on the display, repeat this procedure.
Model: KCM1402
Err2 - If the brewing cycle does not complete within 15 minutes, the coffee maker will display an Err2. This can occur if
the heater is not working properly.
Model: KCM0802
Error
Code
Information Resolution
1 It means Motor Error
Reset the unit by unplugging and plugging back in. Then resume
brewing.
https://producthelp.kitchenaid.com/Countertop_Appliances/Coffee_Products/Automatic/Troubleshooting/Error_Codes_-_Auto…
Updated: Mon, 16 Aug 2021 01:47:22 GMT
Powered by
1

KitchenAid KCM111 Specifications

General

Product type	Drip coffee maker
Programmable	Yes
Capacity in cups	12 cups
Number of spouts	1
Coffee input type	Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Display type	LED
Product color	Black
Ristretto making	-
Latte Macchiato making	No

Weight and Dimensions

Depth	279.4 mm
Width	203.2 mm
Height	355.6 mm