Why is the espresso flowing too quickly from my KitchenAid Coffee Maker?
If the espresso flows too quickly, it could be because the coffee is ground too coarsely; use a slightly finer grind. Another reason might be that there is not sufficient coffee in the filter basket; increase the dose of coffee. Also, the coffee may be tamped too softly; use a slightly firmer tamp between 30-40 lb or 15-20 kg of force.
Why is my KitchenAid KES6403DG Coffee Maker not producing crema?
If no crema is being produced, the coffee may be ground too coarsely; use a slightly finer grind. Also, the coffee may be tamped too softly; use a slightly firmer tamp between 30-40 lb or 15-20 kg of force. Additionally, a single-wall filter basket might have been used with pre-ground coffee.
Why does espresso flow too quickly from my KitchenAid KES6403DG Coffee Maker?
If the espresso flows too quickly from your KitchenAid Coffee Maker, the coffee might be ground too coarsely; use a slightly finer grind. You might also not be using enough coffee in the filter basket; increase the dose of coffee. Another possibility is that the coffee is tamped too softly; use a slightly firmer tamp between 30-40 lb or 15-20 kg of force.
What to do if KitchenAid KES6403DG Coffee Maker espresso flows slowly?
If espresso is flowing slowly or only dripping from your KitchenAid Coffee Maker, it could be due to several reasons. The coffee might be ground too finely, in which case you should use a slightly coarser grind. Alternatively, the coffee may be tamped too hard; use a slightly lighter tamp between 30-40 lb or 15-20 kg of force. Also, the filter basket could be blocked; use a pin to unblock the hole(s).
What does it mean when all mode/dose lights are blinking on my KitchenAid Coffee Maker?
If all Mode/Dose lights are blinking, turn off the machine for 7.5 minutes.
What does it mean when all lights are blinking on my KitchenAid Coffee Maker?
If all the lights are blinking at the same time, turn off the espresso machine and unplug it for approximately 10 minutes. Then, plug it back in and restart the machine.
How to fix slow espresso flow or drips in KitchenAid KES6403DG?
If the espresso flows slowly or only drips, the issue might be due to a few reasons. The coffee may be ground too finely, so try using a slightly coarser grind. Also, you might be tamping the coffee too hard; use a slightly lighter tamp between 30-40 lb or 15-20 kg of force. It's also possible that the filter basket is blocked; use a pin to unblock the hole(s). The machine might also need to be descaled.
Why does the water light continuously blink on my KitchenAid Coffee Maker?
The water light may blink continuously for several reasons. First, make sure there is water in the water tank and that the tank is properly assembled. Second, the steam wand may be blocked; remove it from the espresso machine and thoroughly clean it. Finally, the coffee puck may be too dense; adjust to a larger grind size, and if using a double-wall basket, clean the exit hole with a pin.
What to do if my KitchenAid KES6403DG espresso machine will not start?
First, verify the espresso machine is securely plugged into a grounded 3-prong outlet. Next, check if the main power switch is turned on. Lastly, if your home has a circuit breaker box, ensure the circuit is closed.
How to fix KitchenAid KES6403DG that will not start?
If your KitchenAid Coffee Maker isn't starting, first, make sure it's securely plugged into a grounded, three-prong outlet. Then, check that the main power switch is turned on. If you have a circuit breaker box, ensure the circuit is closed.
General| Product Type | Espresso Machine |
|---|---|
| Power Source | Electric |
| Voltage | 120 Volts |
| Type | Espresso Machine |
| Color | Dark Grey |
To Next Page