What does it mean when all lights are blinking on KitchenAid KES6503?
If all the lights on your KitchenAid Coffee Maker are blinking simultaneously, turn off the espresso machine and unplug it for about 10 seconds. Then, plug it back in and restart the machine.
How to fix no crema being produced by KitchenAid KES6503?
If your KitchenAid Coffee Maker isn't producing crema, it could be due to a few reasons. The coffee might be ground too coarsely, so try using a slightly finer grind. Also, the coffee could be tamped too softly; use a slightly firmer tamp between 30-40 lb or 15-20 kg of force.
Why does the water light keep blinking on my KitchenAid KES6503?
If the water light on your KitchenAid Coffee Maker is continuously blinking, make sure there is water in the water tank and that the tank is properly assembled. Also, a blocked steam wand or too dense coffee puck can cause blinking. Remove the steam wand from the Espresso Machine and thoroughly clean it. If the coffee puck is too dense, adjust to a larger grind size; if using a double-wall basket, clean the exit hole with a pin.
What to do if the steam light and all dose lights are blinking on my KitchenAid KES6503 Coffee Maker?
If the steam light and all dose lights are blinking, turn off the machine for 10 minutes.
Why is my KitchenAid KES6503 not producing crema?
If no crema is being produced, the coffee may be ground too coarsely; use a slightly finer grind. Also, the coffee may be tamped too softly; use a slightly firmer tamp between 30-40 lb or 15-20 kg of force. Additionally, a single-wall filter basket might have been used with pre-ground coffee.
Why does steam or hot water flow slowly from the steam wand of my KitchenAid Coffee Maker?
If steam or hot water flows slowly from the steam wand, the steam wand may be partially blocked. Remove the steam wand from the espresso machine, soak it in a cleaning solution, use a pin to clear out the hole, and rinse with clear water. The machine might also need to be descaled.
What to do if espresso flows over the edge of the portafilter on my KitchenAid KES6503?
If espresso flows over the edge of the portafilter, ensure the portafilter is completely inserted and rotated until the handle is aligned to the lock icon. Also, if there are coffee grounds around the rim of the filter basket, swipe excess coffee to ensure a proper seal in the group head. Finally, there may be too much coffee in the filter basket; use a lower dose of coffee.
Why is the espresso flowing too quickly from my KitchenAid KES6503 Coffee Maker?
If the espresso flows too quickly, it could be because the coffee is ground too coarsely; use a slightly finer grind. Another reason might be that there is not sufficient coffee in the filter basket; increase the dose of coffee. Also, the coffee may be tamped too softly; use a slightly firmer tamp between 30-40 lb or 15-20 kg of force.
What causes slow steam/hot water flow from KitchenAid KES6503 steam wand?
If steam or hot water flows slowly from the steam wand of your KitchenAid Coffee Maker, the steam wand might be partially blocked. Remove the steam wand from the espresso machine, soak it in a cleaning solution, use a pin to clear out the hole, and then rinse with clear water.
Why does espresso flow too quickly from my KitchenAid KES6503?
If the espresso flows too quickly from your KitchenAid Coffee Maker, the coffee might be ground too coarsely; use a slightly finer grind. You might also not be using enough coffee in the filter basket; increase the dose of coffee. Another possibility is that the coffee is tamped too softly; use a slightly firmer tamp between 30-40 lb or 15-20 kg of force.
General| Type | Espresso Machine |
|---|---|
| Pump Pressure | 15 bar |
| Material | Stainless Steel |
| Product Type | Espresso Machine |
| Power Source | Electric |
| Voltage | 120 Volts |
| Special Feature | Milk Frother |
| Included Components | Portafilter |
To Next Page
