9
Preparing the Food Processor for Use
6. Fit the 2-piece food pusher (on models
KFPW760 & KFPM770) or the 3-piece
food pusher (on models KFPW763
& KFPM773) into the Ultra Wide
Mouth™ feed tube.
NOTE: Your Food Processor will not
operate unless the work bowl and work
bowl cover are properly locked on the
base, and the large pusher is inserted to
the maximum fill line on the feed tube
(approximately halfway down).
To avoid damage to the work bowl, do
not remove the work bowl from the
base without first removing the work
bowl cover.
Multipurpose Blade and
Dough Blade Assembly
1. Place the blade on the power shaft.
2. Rotate the blade so it falls into place
on the shaft.
Slicing, Shredding, and Cutting
Disc Assembly
1. Place the disc stem on the
power shaft.
Continued on next page
ENGLISH
To Next Page
Loading...
