KitchenAid KGCS105GSS - 30 Inch Sealed Burner Gas Cooktop User Manual

15" (38.1 cm)
Part No. 3191827 Rev. B
Installation Instructions
IMPORTANT:
Installer: Leave Installation
Instructions with the homeowner.
Homeowner: Keep Installation
Instructions for future reference.
Save Installation Instructions for local
electrical inspector’s use.
Write down the model and serial numbers
before installing cooktop.
Both numbers are on the model/serial
rating plate, located on the underside of
the cooktop burner box.
Model #___________________________
Serial # ___________________________
IMPORTANT:
Read and save these
instructions.
Gas Built-in Cooktops
30" (76.2 cm)
36" (91.4 cm)
43" (109.2 cm)
15"
(38.1 cm)
30"
(76.2 cm)
21"
(53.3 cm)
2-7/8"
(7.3 cm)
21"
(53.3 cm)
2-7/8"
(7.3 cm)
2-7/8"
(7.3 cm)
36"
(91.4 cm)
21"
(53.3 cm)
2-7/8"
(7.3 cm)
43"
(109.2 cm)
21"
(53.3 cm)

KitchenAid KGCS105GSS - 30 Inch Sealed Burner Gas Cooktop Specifications

General

Brand	KitchenAid
Model	KGCS105GSS - 30 Inch Sealed Burner Gas Cooktop
Category	Cooktop
Language	English

Summary

Installation Instructions

Read and Save Instructions

Crucial instruction to read and save the installation manual for future reference.

Before You Start

General Safety Precautions

General safety messages, including the use of safety alert symbols and warning words like DANGER and WARNING.

Codes and Ordinances Compliance

Instruction to observe all governing codes and ordinances during installation.

Tools for Installation

Lists the essential tools required for the proper installation of the cooktop.

Installation Dimensions and Clearances

Countertop Opening Dimensions

Details required countertop opening dimensions and provides specific clearance measurements for installation.

Base Cabinet Size Requirements

Specifies the minimum required base cabinet size for each cooktop model.

Installation Requirements

Gas Supply Requirements

Details necessary gas supply line types, pressure, and connection requirements for safe operation.

Electrical Requirements

Outlines the required electrical supply specifications, including voltage, frequency, and grounding.

Cooktop Installation Steps

Prepare Cooktop for Installation

Instructions for removing shipping materials and preparing the cooktop for placement in the cutout.

Secure Cooktop in Countertop

Steps for physically placing and securing the cooktop into the countertop opening using brackets.

System Setup and Operation

Electronic Ignition System

Explanation of how the electronic ignition system works, replacing standing pilots for burner ignition.

Initial Lighting and Burner Adjustment

Procedure for lighting burners, checking operation, and adjusting low settings for reliable reignition.

Maintenance and Support

Troubleshooting Cooktop Operation

Basic checks for when the cooktop does not operate, focusing on power and gas supply.

Customer Assistance and Service

Guidance on obtaining help for operating questions, maintenance, or service needs.

Cleaning and Maintenance

Instructions for safely cleaning and maintaining the cooktop, including gas and electrical supply shutoff.