13
Operating Your Hand Blender
Using the chopper attachment
(Included with Model KHB2351)
Use the chopper attachment to chop small
amounts of food such as cooked meat,
cheese, vegetables, herbs, crackers, bread,
and nuts.
1. Insert the chopper
blade into the
chopper bowl.
2. Add small pieces of
foods to the bowl.
3. Insert the chopper
attachment into the
chopper bowl.
4. Align the chopper bowl
with the motor body
and press together.
5. Hold the motor body
with one hand and the
chopper bowl with the
other while processing.
6. Press the Power button to activate the
Hand Blender. For best results, “pulse”
the power by pressing and releasing the
Power button until ingredients reach the
desired consistency.
7. When chopping is complete, release
the Power button.
8. Remove motor body from chopper
attachment.
9. Unplug immediately after use and before
removing or changing attachments.
*Processing times and speeds are approximate.
Actual usage may vary depending on quality of food and desired chop size.
Chopper Processing Guide
Food Quantity Preparation Speed Time*
Meats 200 g/7oz Cut into 2 cm (3/4") cubes 3 15 Seconds
Almonds/Nuts 200 g/7oz Place in whole nuts 2 25 Seconds
Garlic 10–12 Cloves Place in whole cloves 2 15 Seconds
Onions 100 g/3.5 oz Cut into quarters 2 15 Seconds
Cheese 100 g/3.5 oz Cut into 1 cm (3/8") cubes 3 30 Seconds
Hard boiled eggs 2 Place in whole eggs 3 3 Pulses
Carrots 200 g/7oz Cut average carrots into quarters 2 15 Seconds
Herbs 50 g/2 oz Remove stalks 3 15 Seconds
To Next Page
Loading...
