9
To Operate the Speed Control
NOTE: When plugged in, an
accidental touching of the Speed
Control, or other circumstances, may
result in the mixer starting
unexpectedly.
1. Make certain the Speed Control is
in the “OFF” position by sliding it
backward as far as possible.
“OFF/O” will be visible on the
speed control pad when the switch
is in the “OFF” position.
2. Plug the mixer into an electrical
outlet.
3. Always start mixing at the lowest
speed by sliding the Speed Control
forward to the first position mark,
which is Speed 1.
4. To increase the mixer speed, slide
the Speed Control forward. To
decrease the mixer speed, slide the
Speed Control backward.
5. When the mixing job is finished,
shut off the mixer by sliding the
Speed Control backward as far as
possible. Unplug the mixer before
removing the accessories.
To Next Page
Loading...
