NOTE:Do NOT plug power supplycord Into outlet.
R,Put on glovesand safetyglasses.
.Determine where you will install
yourhot waterdispenser.Check
belowsinkto assure that reinforcing
ribs,supportbracketsor cabinet
constructionwill not interferewith
spout.Knockout plugfrom holein
sink or cuta holein sink or
countertop.
NOTE: It Is recommended that only
a licensed plumber or professional
installer cut an opening In the sink
or countertop.
=Remove maskingtape and tag
from spoutassembly.Do Not remove
quick-connect fittings from spout
tubing or tank tubing. Do not
replacequick-connectfittingswith
brassfittings.Brassfittingscan cause
lead contamination.
CarefullypullOn/Off Cap offthe
spoutassemblyand set aside.
To Next Page
Loading...
