USING THE FOOD CHOPPER | 9
USING THE FOOD CHOPPER
1
Be sure the Food Chopperis
unplugged� Start with the
work bowl handle facing front onthe
base� Rotate the handle
90° counterclockwise to lock into
place� When assembled properly, the
handle will face the right side�
2
Fit the blade over the shaft in the
center of the work bowl, rotate and
press down until it rests at the bottom
of the work bowl�
3
Place ingredients to be processed
inside the work bowl� For uniform
consistency of processed foods, cut
fruits, vegetables, and meats into
2�5-cm pieces�
4
Place the lid on the work bowl with
the lid handle facing front� Rotate the
lid handle to the right� The lid will
click when locked into place� Rotate
the lid counterclockwise to lock into
place�
ASSEMBLING AND RUNNING THE FOOD CHOPPER
IMPORTANT: Do not process coffee
beans or hard spices such as
nutmeg, which may damage the
Food Chopper�
NOTE: The work bowl and lid must be
locked into place for the Food Chopper to
operate�
W11247266A.indb 9 11/21/2018 6:56:22 PM
To Next Page
Loading...
