Adjusting the bin glides
Use the bln glldesto secure odd-shaped
ItemsInthe door blnsor toseparate other
Items.
Toadjust lhe glides:
I. Grasp gllde.
2. Move glide along bln.
Removing the can dispensers
Each dispenser holds 5 beverage cans In a
convenient place, leaving more shelf space
for larger Items.
Toremove dlslpenser:
I. Uft dlspenserup.
2. Pulldlspenser stralght out.
Toreplace dispenser:
I. Hold back of dispenserabove desired
guide.
2. Pushdispenser back and down untilIt
stops.
IMPORTANT:When replacing the can
dispensers, you must replace the boffom
dispenser first.
Adjusting the cantilever refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator.
To remove shelves:
I. Tiltshelf up at front.
2. Uft shelf up at back.
3. Pull shelf straight out.
IMPORTANT: Glass shelves are heavy, Handle
with care.
To replace shelves:
I. Guide the rear hooks of shelf Into slots In
the shelf supports.
2. Tilt shelf up at front until hooks drop Into
slots. Lower front of shelf to level position.
3. Check the stability of the shelf to be sure
hooks have been inserted properly.
To Next Page
Loading...
