KitchenAid KSRB22Q - Page 11

USING THE REFRIGERATOR , ;
Removing the crispers and cover
To remove crispers:
1. Roll crisper out to the stop.
2. Lift crisper front and pull out the rest of ihe
way.
To replace crispers:
1. Position back crisper rollers between front
roller of track and tiack Itself.
2. Push crisper up onto track.
3. Roll crisper back until It stops.
To remove glass cover:
1. Remove top crisper.
2. Tilt cover up at front.
3. Lift cover at back and pull straight out.
4. Replace in reverse order.
IMPORTANT: Glass shelves are heavy. Handle
with care.
To adjust crisper humidity control:
You can control the amount of humidity In
the moisture-sealed crisper.
1. The control can be adjusted to any setting
between LOW and HIGH.
2. LOW (open) lets moist air out of the crisper
for best storage of fruits and vegetables
with skins.
3. HIGH (closed) keeps moist air In the crisper
for best storage of fresh leafy vegetables.
Removing the meat locker
To removo meat locker:
1. Roll meat locker out to the stop.
2. Lift meat locker front and pull out Ihe rest
of the way.
To replace meat locker:
1. Position back rollers of meat locker
between front roller of track and Irack
Itself.
2. Push meat locker up and onto track.
3. Roll meat locker back until it stops.
11