To Next PageTo Next Page
Need help?Do you have a question about the KitchenAid KUDA220T and is the answer not in the manual?
General| Type | Built-In |
|---|---|
| Capacity | 14 place settings |
| Interior | Stainless Steel |
| Energy Star Certified | Yes |
| Third Level Rack | No |
| Soil Sensor | Yes |
| Wash Cycles | Rinse Only |
| Number of Options | Hi-Temp Wash, Sani Rinse |
| Number of Racks | 2 |
Warnings about improper electrical connections and grounding leading to shock.
Instructions for grounding via a cold water pipe.
Guidelines for connecting the dishwasher using a flexible cord and plug.
Warnings about drain line connection height, siphoning, and kinks.
Prepare water and drain lines by cutting a 1" hole in the cabinet.
Install a water shutoff valve in an easily accessible location.
Flush the water line to remove particles before connecting.
Ensure the water line has no sharp bends or kinks.
Install air gap and attach drain hose to air gap or waste tee.
Cut a 1" hole in the cabinet for electrical wiring, using a grommet if metal.
Adjust leveling legs to fit the 34" cabinet opening height.
Align door with cabinet and secure dishwasher to countertop or floor.
Connect water supply line to the dishwasher valve using appropriate fittings.
Connect the drain hose to the dishwasher valve and ensure no kinks.
Attach dishwasher to countertop using brackets to prevent tilting.
Level the interior and check door operation; adjust spring brackets if needed.
Verify all parts installed, turn on supplies, and start a cycle.
