Checkthatlevelinglegsarefirmlyagainstthefloor.
Closeandlatchthedoor,andplacelevelagainstthe
frontpanel.Checkthatdishwasheriscenteredfromfront
tobackintheopening.Ifneeded,adjustlevelingleguntil
dishwasherisplumb.Repeatforothersideofdishwasher.
HelpfulTip:Pushuponfrontofdishwashertoraise
dishwasheroffthegroundto adjustfrontlegs.With
someinstallations,itmaybeeasiertoadjustthefrontleg
usingthe3/16"hexheadsocketoradjustablewrench.
Placelevelagainsttopfrontopeningoftub.Checkthat
dishwasherislevelfromsideto side.Ifdishwasherisnot
level,adjustfrontlegsupordownuntildishwasheris
level.
20
Coppertubingonly:Slidenutthenferruleontocopper
tubingabout1"(2.5cm).
NOTE:Toavoidvibrationduringoperation,routethe
watersupplylinesothatitdoesnottouchthe
dishwasherbase,frameormotor.
Coppertubingonly:Putthetubingintothe90° elbow
fittingasfarasitwillgo(thecoppertubingbendsand
kinkseasily),Slidethenutandferruleforwardandstart
thenutontotheelbowthreads,
Flexiblebraidedconnection:Securenuttoelbowusing
5/8"openendedwrenchoradjustablewrench.
NOTE:DonotuseTeflon®tapewithcompressionfittings.
Holdthe90° elbowfittingstillwithoneadjustablewrench
andtightenthenutwithsecondadjustablewrench.
Helpful Tip: Use a 5/8" open ended wrench for easier
access to tighten connection.
To Next Page
Loading...
