To Next PageTo Next Page
Need help?Do you have a question about the KitchenAid KUWS24RSBS and is the answer not in the manual?
General| Brand | KitchenAid |
|---|---|
| Model | KUWS24RSBS |
| Category | Wine Cooler |
| Capacity | 24 Bottles |
| Type | Built-In |
| Configuration | Single Zone |
| Shelves | 5 |
| Energy Star Certified | Yes |
| Color | Black Stainless Steel |
| Number of Shelves | 5 |
| Shelf Material | Wood |
| Temperature Zones | 1 |
| Control Type | Digital |
| Lighting | LED |
| Refrigerant Type | R600a |
| Door | Glass Door |
Important safety information for all KitchenAid refrigeration units.
Explanation of the components of KitchenAid model numbers.
Explanation of the components of KitchenAid serial numbers.
Location of model/serial labels and wiring diagrams on the appliance.
Details of the KitchenAid refrigerator warranty coverage and exclusions.
List of required tools and parts for appliance installation.
Guidelines for choosing a suitable installation location for the unit.
Specifications for the electrical supply needed for the appliance.
Instructions for safely unpacking the refrigerator unit.
Adjusting the unit's leveling legs for proper door closure.
Step-by-step guide to removing the appliance's base grille.
Overview of the cooling system and common components across units.
Explanation of airflow patterns and temperature zones within the units.
Function and location of the ambient thermostat for Wine Cellar/Beverage Center.
How temperature displays work and their sensor locations in UW/BC models.
Procedure for removing the racks from the wine cellar or beverage center.
Steps to remove the rack tracks from the unit's interior.
Instructions for disassembling and removing the separator unit.
Guide to removing the cover protecting the evaporator assembly.
Steps for accessing and removing the evaporator fan and motor.
Procedure to remove the main thermostat in Wine Cellar and Beverage Center models.
Procedure to remove the main thermostat in the Undercounter Refrigerator.
Location and description of the wiring connector block behind the evaporator.
Steps to remove the defrost heater element from the unit.
Procedure for removing the defrost thermostat and thermal fuse.
Instructions for safely removing the evaporator assembly.
Guide to removing the base grille to access components.
Steps to remove the door switch or light switch from the control box.
How to remove the access panel to reach internal components.
Procedure for removing the defrost timer from the unit.
Identification of wire connectors within the unit compartment.
Steps to remove the compressor's relay, overload, and run capacitors.
Procedure for removing the drain pan from the unit.
Steps to remove the condenser fan motor assembly.
Procedure for removing the temperature display transformer.
Instructions for safely removing the compressor from the sealed system.
Procedure to remove the ambient thermostat in UW/BC models.
Steps to remove and replace the interior light bulb.
Procedure to remove the door switch actuator from the door.
Steps to remove the entire door from the appliance.
Procedure for removing the door skin and handle assembly.
Instructions for removing and replacing the door gasket.
Diagram and explanation of the Beverage Center's three temperature zones.
Procedure to access the upper compartment thermistor in BC models.
Steps to disassemble the separator unit to access thermistors.
Testing procedure for the evaporator fan motor resistance.
Testing procedure for the defrost heater resistance.
Testing procedures for door and rocker light switches.
Testing procedure for the compressor's relay and overload protector.
Testing procedure for the condenser fan motor resistance.
Testing procedure for the temperature display transformer windings.
Testing procedure for the defrost timer functionality.
Testing procedure for compressor windings resistance.
Testing procedure for the ambient thermostat continuity.
Testing procedure for the defrost bimetal continuity at specific temperatures.
Troubleshooting steps for units that fail to power on or operate.
Troubleshooting steps for interior or exterior lighting issues.
Explanation for water accumulation in the defrost drain pan.
Troubleshooting steps when the compressor motor runs excessively.
Troubleshooting steps for units failing to maintain the set temperature.
Troubleshooting steps for excessive condensation or frost inside the unit.
Troubleshooting steps for a door that is hard to open.
Troubleshooting steps for a door that does not seal properly.
Schematic showing the electrical connections for the Wine Cellar model.
Schematic showing the electrical connections for the Beverage Center model.
Schematic showing the electrical connections for the Undercounter Refrigerator.
Phone numbers and website for product support and literature orders.
