Why is my KitchenAid Kitchen Appliances not sealing bags?
If your KitchenAid Kitchen Appliance does not seal the bags, it could be due to dirty contacts, a broken sealing bar element, or no power supply. Release the sealing bar from its two pins and clean the two holes on the bar. If the problem persists, contact after-sales service.
Why are all the LED indicators flashing on my KitchenAid KVXXX 14600 Kitchen Appliances?
If all the LED indicators on the control panel of your KitchenAid Kitchen Appliance are flashing, it indicates overheating. To resolve this, switch off the machine and wait approximately 15 minutes to allow it to cool down and automatically reset the thermal overload cutouts. If the problem persists after switching it back on, contact after-sales service.
What to do if KitchenAid KVXXX 14600 displays ERROR05?
If your KitchenAid Kitchen Appliance displays ERROR05, it means that many consecutive cycles were performed and the oil in the pump has overheated. Turn off the appliance and let it cool down. If the issue continues after restarting, contact after-sales service.
How to improve sealing on KitchenAid Kitchen Appliances?
If sealing is not optimal on your KitchenAid Kitchen Appliance, try the following: * Adjust the sealing level and repeat the cycle. * Allow at least 2 minutes between cycles for the sealing bar to cool. * Use a suitable bag. * Position the bag's edge centrally, protruding about 2 cm from the sealing bar, avoiding creases. * Turn the bag's edge over to keep the outer part clean during product insertion. * Clean the sealing bar and counter-pressure rubber. If the problem persists, contact Technical Support.
What to do if the lid doesn’t open on KitchenAid KVXXX 14600?
If the lid on your KitchenAid Kitchen Appliance doesn’t open, it may be because a cycle is running, or there is no electrical power during the cycle. It's normal for the lid to remain closed during operation. Wait for the cycle to finish or press STOP to interrupt it and empty the tray. Restore power and wait for the tray to decompress.
What to do if KitchenAid KVXXX 14600 does not switch on?
If your KitchenAid Kitchen Appliance does not switch on, the cause may be no power supply. Check the electrical connection. If the problem continues after checking the connection, contact after-sales service.
Why the pump does not work on my KitchenAid KVXXX 14600 Kitchen Appliances?
If the cycle starts but the pump doesn't work on your KitchenAid Kitchen Appliance, it could be due to overheating. Switch the machine off and wait approximately 15 minutes before switching it back on. If the problem continues, contact after-sales service.
What does it mean when the STOP button flashes on KitchenAid KVXXX 14600?
If the LED indicator of the STOP button flashes on your KitchenAid Kitchen Appliance, accompanied by an intermittent acoustic signal, it indicates insufficient vacuum in the chamber. This could be due to the lid not being pressed at the start of the cycle, the vacuum container lid not being properly fitted, or the lid seal being worn or incorrectly positioned. Switch the machine off and wait for about 15 minutes. If the problem continues, contact after-sales service.
What does ERROR02 mean on KitchenAid KVXXX 14600 Kitchen Appliances?
If your KitchenAid Kitchen Appliance displays ERROR02 at the end of a cycle, with the symbol remaining on or flashing, it indicates that the product inserted is too hot or contains too much liquid. Remove the product from the vacuum chamber and re-insert a vacuum bag with the correct quantity and temperature of food (refer to the table in the Preliminary Notes chapter). Repeat the function. If the problem persists, contact Technical Support.
Why are the keys not responding on my KitchenAid Kitchen Appliances?
If the keys on your KitchenAid Kitchen Appliance do not react to commands, it is possible that the surface of the control panel is dirty or wet. Clean and dry the surface of the control panel.
General| Brand | KitchenAid |
|---|---|
| Model | KVXXX 14600 |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
