Why is there too much air in the sealed bag with my KitchenAid Kitchen Appliances?
If too much air remains in the sealed bag of your KitchenAid Kitchen Appliance, it may be due to an unsuitable bag size, a low vacuum level, or the product being liquid. Use a bag of suitable size and repeat the cycle with a higher vacuum level. Note that some air bubbles are normal with liquid products.
How to fix insufficient vacuum in bag with KitchenAid KVXXX 14600 Kitchen Appliances?
If you are getting insufficient vacuum in the bag with your KitchenAid Kitchen Appliance, make sure the bag is positioned correctly, check the state of the Teflon covering, change the bag if needed, and select a bag where the product does not exceed 2/3 of the volume. If the problem persists, contact after-sales service.
What does ERROR03 mean during external container cycle on KitchenAid KVXXX 14600?
If during a cycle with an external container, the symbol comes on accompanied by an acoustic signal and Display ERROR03 on your KitchenAid Kitchen Appliance, it indicates that the lid of the external container is not positioned correctly or the external suction device was not properly connected. Correctly position the lid of the external container and properly connect the external suction device to the packaging machine and the container.
Why do all the LEDs flash when I turn on my KitchenAid KVXXX 14600?
If, upon switching on your KitchenAid Kitchen Appliance, all the LED indicators on the control panel flash for 3 seconds and a long acoustic signal is emitted, it's a reminder to replace the pump oil. Contact KitchenAid after-sales service.
General| Brand | KitchenAid |
|---|---|
| Model | KVXXX 14600 |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
