4
Loading Variations--Adiustable Upper Rack
Combination Position ... either side of rack may
be rai_ed or lowered independently of tile other
to acc_mm7odate extra large items in both racks.
Tilted Position... some items with concave bot-
tom surfaces may collect water. To obtain maxi-
mum drainage from bottoms, load all such items
on one side and tilt rack down on that side.
Loading Variations-uppe Rack
USE OF THE FLEX-O-DIVIDERS
In the center of the rack are two rows of fixed Each divider works independently of the others.
pins. On either side of the upper rack, there is Positions of any or all of the dividers can be
a pair of mowd_le dividers called Flex-O-Dividers. changed to fit InTr_in." needs.
The outside I_w of each pair of dividers adjusts
down toward side of rack.
TO ADJUST, pla_e thumb and index linger on pins
as shown. Press toward each other and secure
divider into any one of the several notches pro-
vided.
The inside row of each pair of dividers folds down
toward the center pins.
TO ADJUST, place thumb as shown. Release pin
from tab and place divider in down position.
Outside Rows Inside Rows
To Next Page
Loading...
