Need help?Do you have a question about the KITMA FCB23F and is the answer not in the manual?
General| Brand | KITMA |
|---|---|
| Model | FCB23F |
| Category | Accessories |
| Language | English |
Covers all parts and labor for one year from installation or 12 months from shipment, including repair or replacement.
Offers an additional year for sealed compressor components, detailing specific conditions and refrigerant types.
Lists specific conditions like consequential damages, non-transferability, misuse, and electrical issues not covered.
Manufacturer liability disclaimer for improper installation, misuse, power defects, inadequate maintenance, or unauthorized modifications.
Specifies operating temperatures for fresh and frozen food, with conditions for room temperature and humidity.
Details the ventilated system, evaporator location, food-safe materials, and refrigerants used (R134a, R404a).
Explains the refrigeration cycle: compression, condensation, evaporation, and heat absorption for cooling.
Explains the 'digital control unit' for parameter regulation and the 'main switch pilot light' for power status.
Advises careful transport and handling to prevent hazards and damage, warning against placing on its side.
Guide on placing the refrigerator in a cool, ventilated area away from heat and sunlight, and initial cleaning.
Details professional connection, use of a circuit breaker, and voltage requirements (+/- 10% of rated voltage).
Recommends monthly cleaning, emphasizing unplugging the unit and using mild detergent for surfaces.
Addresses refrigerator not working (power supply) and temperature increase (heat source, dirty condenser).
Instructs users to contact the dealer's technical department, providing serial number and date of purchase.
Diagram identifying key components like powerswitch, evaporator, compressor, and fans.
Guide on initial ventilation, cleaning, power connection, and how the digital controller adjusts temperature.
Explains panel layout, indicator lights, and how to view and change set points for temperature control.
Details how to change parameters, lock/unlock the keyboard, and start manual defrost.
Lists alarm messages (P1, P2, HA, LA, EA, CA, dA) and their corresponding system outputs or causes.
Schematic illustrating the wiring and connections for the fan cooling chill series product.
Table detailing product name, model code, power, frequency, current, temperature, refrigerant, dimensions, and weight.
Shows compliance with UL STD.471, CSA STD.C22.2 N0.120, and NSF/ANSI STD.7.
To Next Page
