EasyManua.ls Logo

Kitsound FRESH - Setting Alarm 2; Snooze Functionality; Turning Off or Cancelling Alarms; Playing Music

Kitsound FRESH
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 11
Setting alarm 2
1. Put the Fresh into standby mode.
2. Press and hold the
button. The alarm 2 icon will show up and the hour digit will be flashing.
Press the
or
button to change the hours, followed by
to confirm.
3. Press the
or
to change the minutes, followed by
to confirm.
4. The alarm 2 icon will then flash. Press the
or
button to select between buzzer, FM or iPod to
wake you up, followed by
to confirm.
Note: If the alarm sound is set to iPod and there is no iPod or iPhone connected, the alarm sound
will automatically switch to buzzer. In order to wake to your iPod or iPhone, it must be connected and
powered off. If it is in play mode, no alarm will sound. If your iPod or iPhone has less than one hour of
songs, put it in repeat mode.
5. The alarm is now set.
Snoozing
Press the
button. The alarm will then go off and will resume again in nine minutes.
Note: The alarm will repeat every day until it is reset.
Turning off the alarm
Press the
button.
Cancelling the alarm(s) you have set
With the Fresh in standby mode, press the / button once until the alarm icon stops showing on
the LED display.
Playing your music
1. To listen to music, dock your iPod or iPhone, turn the Fresh on and select iPod mode. Your music will
start playing automatically.
2. To pause your music, press the
button. To resume playback, press it again.
3. To go to the next or previous track, use the
or
button. To search the current track using fast
forward or rewind, press and hold
or
while the track is playing.
4. To adjust the volume, press the
or
button.
Note: When you connect your iPod or iPhone, the time will be synchronized automatically.

Related product manuals