How to reset Kitsound Clock Radio Revive?
If your Kitsound Clock Radio Revive isn't functioning as expected, you can try resetting it to its original factory settings. To do this, first ensure you are in FM or DAB mode. Then, press and hold the ‘Mode’ button. While holding the ‘Mode’ button, press the ‘Enter’ button. The Revive will then reset and restart itself.
General| Brand | KitSound |
|---|---|
| Model | REVIVE |
| Category | Clock Radio |
| Bluetooth | Yes |
| FM Radio | Yes |
| Alarm Function | Yes |
| USB Charging | Yes |
| Display | LED |
| Tuner | Digital |
| Alarm | Dual Alarm |
| Snooze function | Yes |
| Auxiliary Input | Yes |
| Power Source | Mains-powered |
Lists the items included in the product packaging for the Revive DAB/FM alarm clock radio.
Details the various buttons and their associated functions on the Revive DAB/FM alarm clock radio.
Explains the two methods for powering the Revive: mains power and battery power.
Guides on operating the Revive, including selecting DAB/FM modes, stations, and adjusting volume.
Instructions for setting, recalling presets, and viewing information in DAB radio mode.
Instructions for scanning stations, setting presets, and viewing information in FM radio mode.
Details on automatic time setting via DAB and how to use the sleep timer function.
Step-by-step guide to setting, turning on/off, and stopping alarms for the Revive.
Guidelines on how to properly care for the Revive, including do's and don'ts.
Information on how to reset the Revive to factory defaults and contact support.
To Next Page
