Kitsound REVIVE - DAB and FM Radio Modes; DAB Radio Mode Operation; FM Radio Mode Operation

10 11
Setting a preset
Up to 10 stations can be set under a preset. To store a radio station under a preset, press and hold the
‘Preset’ button. ‘Preset # Save’ will appear on the screen. Select the preset number by pressing the
‘Next station’ or ‘Previous station’ button and then press ‘Enter’ when done.
Recall a preset
Press (don’t hold) the ‘Preset’ button. Select the preset number by pressing the ‘Next station’ or
‘Previous station’ button and then press ‘Enter’ when done.
View more information
You can view further information by pressing the ‘Info’ button several times. This information includes:
– DLS (Dynamic Label Segment – short text information broadcast with DAB audio)
– Frequency
– PTY (Program Type)
– Time/date
FM radio mode
FM radio mode receives analogue radio from the FM band. While FM radio is playing, the screen shows
its frequency.
Scan FM station
The first time you select FM radio, it is set to the lowest frequency in the FM band.
In FM mode, press and hold the ‘Next station’ or ‘Previous station’ button to scan through the
FM frequencies. Alternatively, press the ‘Scan’ button. The scan stops when a station is found.
Setting presets
This is the same as in DAB mode (see DAB mode preset instructions).
View more information
You can view further information by pressing the ‘Info’ button several times. This information includes:
– PS (Programme Service)
– PTY (Programme Type)
– Audio mode (Auto is default, switch between Auto/Mono by pressing ‘Enter’)
– Time/date
[...continued] DAB radio mode